New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

no power to the secondary fuel injectors

Thread Tools
 
Search this Thread
 
Old 12-04-09, 01:17 PM
  #1  
Junior Member

Thread Starter
 
thegcg@gmail.com's Avatar
 
Join Date: Aug 2009
Location: va
Posts: 16
Likes: 0
Received 0 Likes on 0 Posts
no power to the secondary fuel injectors

whats up guys i have a problem with the secondary injectors not comeing on no ground from ecu replaced the ecu tested the tps and the boost sensor its a 1987 na gxl man trans all stock need help please does not add up
Old 12-04-09, 03:07 PM
  #2  
needs more track time

iTrader: (16)
 
gracer7-rx7's Avatar
 
Join Date: Mar 2006
Location: Bay Area CA
Posts: 9,186
Received 509 Likes on 350 Posts
How did you determine that the secondary injectors aren't coming on? What are the symptoms?
Old 12-04-09, 07:50 PM
  #3  
Junior Member

Thread Starter
 
thegcg@gmail.com's Avatar
 
Join Date: Aug 2009
Location: va
Posts: 16
Likes: 0
Received 0 Likes on 0 Posts
lack of power past 3800 shift light comes on at 5000 when cold then at 4000 when at temp no hesation at 3800 no power . i hot wired the injector and then grounded it. it kicked on because the injector powers off of the ecu in neg rather than pos . what controls the secondaryinjectors in the ecu??????
Old 12-04-09, 08:59 PM
  #4  
NASA-MW ST4

iTrader: (7)
 
farberio's Avatar
 
Join Date: Dec 2004
Location: Norcal, Bay Area
Posts: 3,800
Likes: 0
Received 3 Likes on 3 Posts
Have you verified that your aux ports are opening?
Old 12-05-09, 10:20 AM
  #5  
Engine, Not Motor

iTrader: (1)
 
Aaron Cake's Avatar
 
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes on 91 Posts
The ECU decides to fire the secondary injectors based on MAP and RPM. If you disconnect the pressure sensor and then rev the engine to 4000 RPM, the secondaries should fire. Use a stethoscope to listen to make sure they are clicking.




All times are GMT -5. The time now is 09:36 AM.