newbie problems!Wheel fitment FD.
12-26-12, 06:04 AM
#1
Junior Member
Thread Starter
Join Date: Dec 2012
Location: wilkes barre pa
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
newbie problems!Wheel fitment FD.
Ok so im new to fds and i am starting an fd build from shell up i have a couple questions any help is greatly appreciated.
1st I know its been asked a million times but I just need a direct answer. I plan on running ksports coilovers and I want to run 18x10.5 rear and 18x9.5 fronts I will be rolling fenders now what offsets can I be safe with I know stock any lower than +35 and you can potentially have rubbing issues
2nd im not going crazy with performance but can I streetport and keep the stock twins with daily driver intentions in place?
Any help is greatly appreciated especially with the wheels
1st I know its been asked a million times but I just need a direct answer. I plan on running ksports coilovers and I want to run 18x10.5 rear and 18x9.5 fronts I will be rolling fenders now what offsets can I be safe with I know stock any lower than +35 and you can potentially have rubbing issues
2nd im not going crazy with performance but can I streetport and keep the stock twins with daily driver intentions in place?
Any help is greatly appreciated especially with the wheels
Last edited by misterstyx69; 12-29-12 at 06:05 PM.
12-30-12, 08:15 AM
#3
Yes. Though IMO you will want a tunable standalone (PFC is most popular with alot of support) rather than the stock ECU. The other advantage is that you can delete emissions (if you don't have testing in PA) and greatly simplify things when you have it apart for porting.
Thread
Thread Starter
Forum
Replies
Last Post
diabolical1
2nd Generation Specific (1986-1992)
30
01-30-16 05:50 AM