New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

new rx7 rally car setup advice

Thread Tools
 
Search this Thread
 
Old Sep 23, 2009 | 08:23 PM
  #1  
raza88's Avatar
Thread Starter
Can Post Only in New Member Section
 
Joined: Sep 2009
Posts: 4
Likes: 0
From: melb
new rx7 rally car setup advice

hi guys ive just become the very impressed new owner of a 1979 rx7 rally car with series4 13b turbo motor rx5 5sp 3.9lsd wolf comp! although its lots of fun on the gravel im told these cars setup well are very good on bituman! the suspension needs replacing shocks springs rear panard bushs ect if any1 could help with options or advice it would be much appreciated! any info on replacment gearboxs? as mine is noisey! tri link panard? rear camber? thanks
Reply
Old Sep 23, 2009 | 10:10 PM
  #2  
gracer7-rx7's Avatar
needs more track time
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (16)
 
Joined: Mar 2006
Posts: 9,788
Likes: 809
From: Bay Area CA
Cool. Post up some pics.
You might find some useful info in the Race section. There is a thread now for rallycross if you want to peruse.
https://www.rx7club.com/showthread.p...82#post9514382
Reply
Old Sep 24, 2009 | 04:37 AM
  #3  
raza88's Avatar
Thread Starter
Can Post Only in New Member Section
 
Joined: Sep 2009
Posts: 4
Likes: 0
From: melb
thanks will check it out
Reply
Old Sep 24, 2009 | 04:42 AM
  #4  
JL01's Avatar
Newbie
 
Joined: Mar 2004
Posts: 1
Likes: 0
From: CA
That sounds like so much fun.
Reply
Old Sep 24, 2009 | 05:22 AM
  #5  
raza88's Avatar
Thread Starter
Can Post Only in New Member Section
 
Joined: Sep 2009
Posts: 4
Likes: 0
From: melb
yep its lots of fun 300rwhp on gravel puts a smile on your face!!! many would say its dangerous!!! so the next step is to make it a bit safer spoke to roll cage fabricator today as it only has half cage so its getting fully tied to shell 6 point as my limited budget allows! also seems my diff walks a bit panard rod bushs?? and the gearbox is noisy not sure if its a throw away as syncros are crunching when warm tried to remove filler plug to change oil or check if it was low or empty? but the plug wont budge so didnt remove drain plug may weld a bar to it to get filler out!! will post some pics soon
Reply
Old Sep 24, 2009 | 10:23 AM
  #6  
Kentetsu's Avatar
Lives on the Forum
Tenured Member 15 Years
 
Joined: Jun 2004
Posts: 11,359
Likes: 14
From: Grand Rapids Michigan
Billy Waits from www.re-speed.com should become your new best friend. He spends a lot of time on this forum too (bwaits_). Best customer service and advice that you will find anywhere.


.
Reply
Old Sep 25, 2009 | 02:55 AM
  #7  
raza88's Avatar
Thread Starter
Can Post Only in New Member Section
 
Joined: Sep 2009
Posts: 4
Likes: 0
From: melb
great thanks for the tip kentetsu
Reply
Old Sep 25, 2009 | 10:42 AM
  #8  
Kentetsu's Avatar
Lives on the Forum
Tenured Member 15 Years
 
Joined: Jun 2004
Posts: 11,359
Likes: 14
From: Grand Rapids Michigan
No problem. Billy advised me on my build. I told him I wanted a car that I could drive to work everyday, but will win at Autocross. Following his advice, I ended up with a car that is a joy to drive on a daily basis that is still capable of eating Miatas for breakfast. Heres a thread on my latest race results, which includes a short list of cars I beat: https://www.rx7club.com//showthread.php?t=863055 I couldn't be happier with the end results.

Billy has a lot of experience in racing, and his dad was big into rally. There was a thread somewhere.... let me see if I can find it.... here you go:

https://www.rx7club.com//showthread.php?t=820987

A thread started by Billy, lots of old pictures of cars raced by him and his dad, along with some information. Kind of tells you what he's all about. Good read, so check it out.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
zensokuracer001
SE RX-7 Forum
6
Oct 2, 2015 10:27 AM
fastrx7man
3rd Generation Specific (1993-2002)
33
Sep 2, 2015 09:42 PM
tridav3
3rd Generation Specific (1993-2002)
6
Aug 17, 2015 06:32 PM
ashleymiche
Introduce yourself
0
Aug 14, 2015 12:59 PM




All times are GMT -5. The time now is 10:52 AM.