new car, multiple issues
#1
Junior Member
Thread Starter
Join Date: Feb 2012
Location: Idaho
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
new car, multiple issues
just bought my first 83 rx7. It has a lot of work done to it, but right away I ran into some issues. The rotor was grinding metal to metal so I have to replace that and possibly the caliper and pads also. On another side the tie rod end (outer) was not tightened down properly so I need to replace that and also the spindle possibly if it is too worn out. Where are the best places to buy these? I'm looking mostly at raybestos, rock auto, and mazdatrix.
Thanks!
Thanks!
#2
Super Moderator
iTrader: (3)
Those are all good places. I like rock auto for a lot of that stuff. Remember to search online or on this site for a coupon if you order from there. Someone will usually have a 5% off posted.
For tie-rod ends, idler arm, etc., I like the Moog brand (can usually get at Rock Auto). For the spindle, you might pick up a good used one on the classifieds on here.
For tie-rod ends, idler arm, etc., I like the Moog brand (can usually get at Rock Auto). For the spindle, you might pick up a good used one on the classifieds on here.
Thread
Thread Starter
Forum
Replies
Last Post
fastrx7man
3rd Generation Specific (1993-2002)
33
09-02-15 09:42 PM
rx8volks
Canadian Forum
0
08-13-15 04:55 AM