Need Some Advice on Springs! And Ball Joints.
#1
Junior Member
Thread Starter
Join Date: May 2010
Location: Alabama
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Need Some Advice on Springs! And Ball Joints.
Hey folks,
pretty new to rx7's, Just replaced all my brake components.
Booster, pads, rotors, drums, wheel cyls etc. I have the lower control arm and tie rod apart while replacing bushings and i figured while i had everything apart i would replace the springs.
I usually always go with eibach or koni or apex. But it seems they dont have a listing for and 83 anymore.
I am not really familiar with the only options i have found.
B&G , Progress, or ST suspensions.
I was wondering what i should go with, Which company is better and if anyone has had experience with any of these companies.
Also i cant seem to find any Ball joint boots that will fit. Energysuspensions is just selling the tierod boot as the ball joint one but its not.
should i just change the ball joint completely or does someone know where i can get a complete lower control arm or just the ball joint boot?
thx
tap
pretty new to rx7's, Just replaced all my brake components.
Booster, pads, rotors, drums, wheel cyls etc. I have the lower control arm and tie rod apart while replacing bushings and i figured while i had everything apart i would replace the springs.
I usually always go with eibach or koni or apex. But it seems they dont have a listing for and 83 anymore.
I am not really familiar with the only options i have found.
B&G , Progress, or ST suspensions.
I was wondering what i should go with, Which company is better and if anyone has had experience with any of these companies.
Also i cant seem to find any Ball joint boots that will fit. Energysuspensions is just selling the tierod boot as the ball joint one but its not.
should i just change the ball joint completely or does someone know where i can get a complete lower control arm or just the ball joint boot?
thx
tap
#2
needs more track time
iTrader: (16)
Hi.
A lot of us RX7 guys get our OEM parts from Ray Crowe at Malloy Mazda. They are a forum sponsor and have been giving us all kick *** discounts even before becoming a vendor. Ray's number is: 888.533.3400
I'll let the first gen guys comment on the rest of the questions in your thread
A lot of us RX7 guys get our OEM parts from Ray Crowe at Malloy Mazda. They are a forum sponsor and have been giving us all kick *** discounts even before becoming a vendor. Ray's number is: 888.533.3400
I'll let the first gen guys comment on the rest of the questions in your thread
Thread
Thread Starter
Forum
Replies
Last Post
risingsunroof82
1st Generation Specific (1979-1985)
8
09-07-15 01:11 PM