xcr00

ok so i am new to the rx7 world and need some hepl. my friend has his car at my shop and we are haveing some issues with it. we got the car in pieces and put everything back together and wound up frying the microtech and just got it back from being rebuilt. we got the car to start but its super rich and its hard to start. it wont hold an idel on its own and if i rev it up it breaks up. i know it just needs to be tuned. i plan on sending it out to be profetionally tuned but for now i was wondering if anyone could walk me through getting this atleast drive worthy. i know it needs a map loaded that is set up for my mods so i can safely drive it and check everything else and get to be tuned. below is a list on whats in the car.

Microtech LT10s with a 3 bar map sensor
Garrett Turbo
Front Mount Intercooler
Precision Injectors- Primaries 750cc Secondaries 1200cc
Stock fuel tank modified with a dry sump
Dual bosch fuel pumps
XS fuel pressure regulator
KG Parts Fuel rails upper and lower
HKS 3" Throttle body elbow
Custom tubular header
Precision 48mm waste-gate currently set with the 15lb spring
Custom three inch downpipe to a GReddy Trust dual exhaust
Chromoly Flywheel

please let me know if anyone help me get this thing running. either let me know what i can do or if you have a map that will work with my setup. and also just explain to me how to load it in. like i said im new to this and not sure how to use this thing. thanks a lot

Aaron Cake

iTrader: (1)

If it is excessively rich, just lean it out in the areas where it is rich, enough to drive it to a professional tuner.

Switch the ECU to Matrix mode and then lean it out in the "left half" of the map until it's somewhat drivable.