New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

Need Help!

Thread Tools
 
Search this Thread
 
Old 09-02-08, 07:05 PM
  #1  
Rebirth after 25 years
Thread Starter
 
thendricks's Avatar
 
Join Date: Aug 2008
Location: Killeen, Tx
Posts: 33
Likes: 0
Received 0 Likes on 0 Posts
TX Need Help!

Does the fuel pump run with the key in ON or in START? and...........Where in the H*LL is the Fuel pump relay switch on a 1983 RX-7 Limited Edition that is bone stock? Need help immediatly! Thank you.


Travis
Old 09-03-08, 01:26 PM
  #2  
drift city
iTrader: (1)
 
AreExSevenProject's Avatar
 
Join Date: Nov 2007
Location: Oregon
Posts: 359
Likes: 0
Received 0 Likes on 0 Posts
idk about fb's but in my FC when you turn the key on you can hear the click that i believe is priming the fuel system...
Old 09-03-08, 03:07 PM
  #3  
AAAAAAAAYYYYYY!!!

 
Tigerx7's Avatar
 
Join Date: Aug 2008
Location: IN/IL somewhere
Posts: 78
Likes: 0
Received 0 Likes on 0 Posts
as far as I know, when you first turn the key to run (engine off), you should hear the fuel pump run for a second to prime the system. Then it should only run when you are starting the car or it is running, so basically if the engine is spinning, the fuel pump is running. as far as the relay location, I have no idea.
Old 09-03-08, 04:15 PM
  #4  
Super Moderator

iTrader: (3)
 
gsl-se addict's Avatar
 
Join Date: Jan 2003
Location: Lynchburg, VA
Posts: 5,088
Likes: 0
Received 11 Likes on 11 Posts
The 79-83 cars have the pump run whenever the key is in the ON position. Starting in '84/'85, the emissions control unit triggers the fuel pump relay either during cranking or when the car is running. There is no fuel pump relay on your car. Power goes from ignition switch, thru a 10A fuse, directly to the pump. Check fuses 1st, then check voltage at the pump with the key turned to the ON position.

Wiring diagrams and factory service manuals can be found here: http://foxed.ca/foxed/index.php?page=rx7manual

They don't have an FSM for the '83 on the site, but the '85 will be fairly close on most things.

Good luck.
Old 09-06-08, 10:20 AM
  #5  
Rotary Freak

 
hanman's Avatar
 
Join Date: May 2001
Location: Peoria, IL
Posts: 1,779
Likes: 0
Received 0 Likes on 0 Posts
addict is correct. The fuel pump is easy to access, just put a multi meter on it with the key on and make sure you have power to the pump.




All times are GMT -5. The time now is 07:26 PM.