New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

need advise

Thread Tools
 
Search this Thread
 
Old 04-21-20, 01:28 PM
  #1  
New to the Club!
Thread Starter
 
K159BON's Avatar
 
Join Date: Oct 2019
Location: Birmingham
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
need advise

Hi guys, i would like to ask info .about 2002 rx7 13b engine. i would be grateful if some1 can help me out.
Basically Coolant goes straight into oil pan so fast.I have check all the freeze plugs but all looks like new. I took the engine off from the car to see it better or if anything rebuild the engine.
So took the oil pan off and pour the water , water comes from centre iron into the pan . I only notice 1 of the bolt on the centre iron is too short . is it the right size or it has to be long 1. I also attached picture to see and

is it right bolt? it looks like it has to be long one.
understand better. thanks from advance .




All times are GMT -5. The time now is 11:11 PM.