New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

Need advice on 1983 Rx7

Thread Tools
 
Search this Thread
 
Old 05-18-10, 03:06 PM
  #1  
Can Post Only in New Member Section
Thread Starter
 
Markjg1987's Avatar
 
Join Date: May 2010
Location: Washington DC
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Need advice on 1983 Rx7

I had just recently spoke with my father and hes going to let me use his 1983 rx7 if i can fix it....and frankly in my opinion to drive the rx7 fixing it is a small price to pay...anyhow, the car had not been operated for probably 1 1/2 to 2 years and this past weekend i tried to tackle the task of getting it up and running
at first i put the key in and i got no signs of life...so i jumped it successfully. however, after pulling the choke and cranking the key along with some gas, the car would only rev up and die..i tried this process several times to see if i could get the car running at least to move it to a different location on property, but it wouldnt stay running long enough...after several attempts the car seemed like it was going to run (it stayed alive much longer in the previous attempts as i kept trying) the car gave out..and now it wont start at all..i know its not the battery..but ive been doing alot of research and some possibilities are a bad fuel pump?..i really dont know..and i would do anything to get this car up and running...i would greatly appreciate any advice on this topic-thanks!
Old 05-19-10, 01:55 PM
  #2  
10th AE
 
Pullout1979's Avatar
 
Join Date: May 2010
Location: Edmonton, AB, Canada
Posts: 25
Likes: 0
Received 0 Likes on 0 Posts
Cool
Old 05-19-10, 02:12 PM
  #3  
Moderator

iTrader: (3)
 
diabolical1's Avatar
 
Join Date: Feb 2002
Location: FL
Posts: 10,822
Received 307 Likes on 268 Posts
welcome to the board.

before you start buying parts and chasing phantoms, i would start simple. check for vacuum leaks and clean the carburetor thoroughly. if that doesn't work, then move on to the more complex things. a tuneup would be next on the list.
Old 06-01-10, 02:04 AM
  #4  
Ha, Ha!. . .no pistons.
 
perceptionproblem's Avatar
 
Join Date: Feb 2010
Location: Bay Area, CA
Posts: 17
Likes: 0
Received 0 Likes on 0 Posts
I just did something similar

Star by checking all your fluids. Oil change, flush your radiator, check the fuel.

Also take a look at your plug wires and vacuum lines. if some of them look cracked, replace them.

I'm fixing an 83 myself. just found a wicked short and have to run a wire all the way down my car! :-)

Good luck, friend.
Old 06-01-10, 09:01 AM
  #5  
Lives on the Forum

 
Kentetsu's Avatar
 
Join Date: Jun 2004
Location: Grand Rapids Michigan
Posts: 11,359
Received 14 Likes on 11 Posts
Yep, start with the basic tuneup items. If that doesn't resolve the problem, then consider a carb rebuild.





.
Old 06-01-10, 10:35 AM
  #6  
n9149j

 
n9149j's Avatar
 
Join Date: May 2010
Location: Barbados
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Keep me in mind when you got the car up and running. I have an 1983 that's refurbished, and I may be able to help you (or you me) when you get to point of starting to work on the reconditioning.
Old 06-04-10, 12:36 AM
  #7  
Ha, Ha!. . .no pistons.
 
perceptionproblem's Avatar
 
Join Date: Feb 2010
Location: Bay Area, CA
Posts: 17
Likes: 0
Received 0 Likes on 0 Posts
Oooh. . we can has pics nao?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
The1Sun
New Member RX-7 Technical
9
03-18-18 11:08 PM
fastrx7man
3rd Generation Specific (1993-2002)
33
09-02-15 09:42 PM
succesfulljoe
1st Generation Specific (1979-1985)
6
08-20-15 08:59 AM



Quick Reply: Need advice on 1983 Rx7



All times are GMT -5. The time now is 02:29 PM.