MSD for rotary CAS possible?
Thread Starter
Spinner
Joined: Jun 2010
Posts: 236
Likes: 0
From: Washington
MSD for rotary CAS possible?
I was just wondering if there is a way to hook an msd ignition box to a stock CAS. For distributors i understand completely. If the msd box doesn't work, what setup or system is out there to amplify the spark of the CAS/coil to the plugs like an msd does?
Joined: Feb 2001
Posts: 29,798
Likes: 128
From: London, Ontario, Canada
You can't connect it directly to the CAS. Well, you can, sort of. Since the CAS triggers twice per rotation you could run leading only with fixed timing. That of course is pointless.
You can connect the MSD box between the ignitor and coil. Most do leading only. However there's no real point unless you are running high boost, rich AFRs (which is an issue in itself) or some form of auxiliary injection. The stock FC ignition is quite good.
You can connect the MSD box between the ignitor and coil. Most do leading only. However there's no real point unless you are running high boost, rich AFRs (which is an issue in itself) or some form of auxiliary injection. The stock FC ignition is quite good.
Joined: Sep 2005
Posts: 25,581
Likes: 136
From: Smiths Falls.(near Ottawa!.Mapquest IT!)
read this:
http://fc3spro.com/TECH/MODS/IGN/cdi.htm
http://fc3spro.com/TECH/MODS/IGN/cdi.htm
Thread
Thread Starter
Forum
Replies
Last Post
datfast1
Old School and Other Rotary
18
Jun 20, 2019 10:53 PM
Under PSI
3rd Generation Specific (1993-2002)
19
Sep 23, 2015 11:47 PM
datfast1
West RX-7 Forum
3
Sep 14, 2015 06:58 PM
