motor swap/build
#1
Junior Member
Thread Starter
Join Date: Dec 2008
Location: St. Louis
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
motor swap/build
i have a 91 turbo that i have build up a few times in the past with different s5 motor and turbo setups. Now i am "doing" something a little different, i am swapping to a 13b-rew and i was wondering if there was anyone that has done the same thing and has some pointers on it.
i have the motor, trans, engine harness and order a power fc for the 13b-rew. i found motor mounts for the swap they look kind of weak. the motor has been street ported and the intake port matched, large single turbo, 720cc P and 1600cc S injectors.
i have the motor, trans, engine harness and order a power fc for the 13b-rew. i found motor mounts for the swap they look kind of weak. the motor has been street ported and the intake port matched, large single turbo, 720cc P and 1600cc S injectors.
#6
Junior Member
Thread Starter
Join Date: Dec 2008
Location: St. Louis
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
the car is not coming along very well at least on the tuning shops end i have put the motor in rebuilt the trans, rebuilt the turbo cause it was one from an old build up and the seals had rotted. they cant seem to get the thing tuned to where it will idle or something and i have no idea how to tune one big reason is i dont have a dyno laying around
Thread
Thread Starter
Forum
Replies
Last Post