New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

Knock Control Box

Old Oct 28, 2010 | 10:39 AM
  #1  
stuwk1's Avatar
Thread Starter
Full Member
 
Joined: Apr 2010
Posts: 230
Likes: 1
From: Indianapolis
Knock Control Box

I am doing a s4 n/a to tii swap, and I was wondering if I need the knock box, the tii engine is to be slightly modified possibly around 280hp or so. I had read that it is relatively inefficient in the s4's.
Reply
Old Oct 28, 2010 | 01:33 PM
  #2  
RotaryRocket88's Avatar
Top Down, Boost Up
Tenured Member 10 Years
iTrader: (7)
 
Joined: Mar 2008
Posts: 8,718
Likes: 6
From: San Diego, CA
Read the FAQ. The link in my sig will also take you to a detailed thread on TII swaps. You don't need the knock box, but you can add it in if you feel like making a little patch harness (with NA EM harness). If you're adapting a TII EM harness (harder), the box will plug in.

280whp is basically impossible with a stock turbo, so unless you're talking about a hybrid, it's out of the question. High boost with either stock turbo (S4 or S5) will not be very efficient, but it works. Intake temps will be higher than with a modern, more efficient turbo. And boost will drop off at higher RPMs, which is the reason it's difficult to make more than about ~250 whp.
Reply
Old Oct 28, 2010 | 07:36 PM
  #3  
stuwk1's Avatar
Thread Starter
Full Member
 
Joined: Apr 2010
Posts: 230
Likes: 1
From: Indianapolis
Originally Posted by RotaryRocket88
Read the FAQ. The link in my sig will also take you to a detailed thread on TII swaps. You don't need the knock box, but you can add it in if you feel like making a little patch harness (with NA EM harness). If you're adapting a TII EM harness (harder), the box will plug in.

280whp is basically impossible with a stock turbo, so unless you're talking about a hybrid, it's out of the question. High boost with either stock turbo (S4 or S5) will not be very efficient, but it works. Intake temps will be higher than with a modern, more efficient turbo. And boost will drop off at higher RPMs, which is the reason it's difficult to make more than about ~250 whp.
Allright Thanks, i was looking at buying a T04B Turbocharger with a .60 AR Compressor and a 1.15 AR Turbine, along with doing a mild street port.

Last edited by stuwk1; Oct 28, 2010 at 08:00 PM. Reason: not specific enough.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
Mar 15, 2022 12:04 PM
SakeBomb Garage
Vendor Classifieds
5
Aug 9, 2018 05:54 PM
ZacMan
Build Threads
4
Sep 19, 2015 09:20 PM
83revival
New Member RX-7 Technical
4
Sep 3, 2015 10:42 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 02:30 PM.