Installing an electric fan on a FC
#1
Full Member
Thread Starter
iTrader: (2)
Join Date: Apr 2009
Location: Cambridge Ontario
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
Installing an electric fan on a FC
I have an 87 rx7 gx and I want to install an electric fan I was wondering what switches/relays work well for turning it off and on. I was reading one thread but they were talking about 1st gens.
Said this part would work well:
http://store.summitracing.com/partde...5&autoview=sku
I just want to make sure it works for an FC I dont see why it wouldnt but I want to make sure.
Or if anyone has any other ideas.
Said this part would work well:
http://store.summitracing.com/partde...5&autoview=sku
I just want to make sure it works for an FC I dont see why it wouldnt but I want to make sure.
Or if anyone has any other ideas.
#2
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
http://www.aaroncake.net/rx-7/efaninstall.htm
The kit in the link you provided should work well but in my opinion, 200 degrees is a bit high to switch the fan on at. I prefer 195 degrees simply because it means the temperature gauge won't move up and down in traffic.
The kit in the link you provided should work well but in my opinion, 200 degrees is a bit high to switch the fan on at. I prefer 195 degrees simply because it means the temperature gauge won't move up and down in traffic.
Thread
Thread Starter
Forum
Replies
Last Post