Ignition upgrade/trailing wiring
#1
Junior Member
Thread Starter
Join Date: Oct 2012
Location: NoVA
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Ignition upgrade/trailing wiring
So I just got my 86' 13b 6-port donor for my LoCost project. It came with the stock crank sensor, but I will not be running an ECU (yet). I'm going to be running a carb and I have an earlier distributor with magnetic pick ups from another box of donor parts. I've been reading on the MSD upgrade to the leading spark plugs, and I think I have a fair understanding on it, I've found several write ups and diagrams here and thankful for it.
My question is about the trailing. My car is not an RX7 so I have no reference to the OEM wiring for the secondary pick and coil wiring. Does anyone have a good source to the wiring diagram for the trailing ignition so that someone can install this from scratch?
Parts that I have is the distributor (cap and rotor), stock 'can' coils as well as the '86 electronic coils, and plug wires. Thanks for any help.
My question is about the trailing. My car is not an RX7 so I have no reference to the OEM wiring for the secondary pick and coil wiring. Does anyone have a good source to the wiring diagram for the trailing ignition so that someone can install this from scratch?
Parts that I have is the distributor (cap and rotor), stock 'can' coils as well as the '86 electronic coils, and plug wires. Thanks for any help.
#3
This is my social media.
iTrader: (22)
Join Date: Jan 2006
Location: WA
Posts: 2,744
Likes: 0
Received 0 Likes
on
0 Posts
Here are FREE factory service manuals right here -> Foxed.ca: RX-7 Manuals
Thread
Thread Starter
Forum
Replies
Last Post
SakeBomb Garage
SakeBomb Garage
0
09-04-15 05:20 PM