Help Identify these Ignition parts M&W stuff
#1
Junior Member
Thread Starter
Join Date: Nov 2011
Location: new york
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Help Identify these Ignition parts M&W stuff
I got a full box of new stuff from Alex Blackson at Redline Rotary. I am a Porsche guy so my experience is very limited with this stuff. I do have 30 years experience as an auto tech so I can say that I see some coil on plug CDI type stuff here. I also see a stand alone ECM controller and lots of performed harness and connectors.
I do plan to find me an RX3 in the near future (currently looking to buy) and I don't know if this is good street stuff or should I sell it. I will want to have about 300hp in the RX3 and like the idea of supercharging for the instant bottom end and generally simple plumbing.
Here are a few pictures of some of the stuff.
I do plan to find me an RX3 in the near future (currently looking to buy) and I don't know if this is good street stuff or should I sell it. I will want to have about 300hp in the RX3 and like the idea of supercharging for the instant bottom end and generally simple plumbing.
Here are a few pictures of some of the stuff.
#3
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
Ok..welcome to the Forum.
here is a link to the Wolf 3D section on the forum. https://www.rx7club.com/wolf-3d-125/
Maybe the guys there can help you out a bit,as all I can see is a controller,and odds and ends,and some ignition stuff.
It isn't much info on my part but it will lead you in the right direction.
here is a link to the Wolf 3D section on the forum. https://www.rx7club.com/wolf-3d-125/
Maybe the guys there can help you out a bit,as all I can see is a controller,and odds and ends,and some ignition stuff.
It isn't much info on my part but it will lead you in the right direction.
Thread
Thread Starter
Forum
Replies
Last Post