Headache-sos
#1
Can Post Only in New Member Section
Thread Starter
Join Date: Apr 2011
Location: eagle rock CA.
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Headache-sos
My 90 rx7 has been converted from a automatic to a 5 speed manual transmision,wnen i push the pedal down it wont come back up,and if the car sits for about 3-5 min.it works fine for about 10 min. And does it again....p.t. 2 where is the clutch adjustment located?help me please anybody.
#2
Right near Malloy
iTrader: (28)
Join Date: Dec 1999
Location: Behind a workbench, repairing FC Electronics.
Posts: 7,841
Received 510 Likes
on
345 Posts
I assume you're talking about the clutch pedal.
Your problem sounds like clutch hydraulics. It's either the master or slave cylinder failing, or a bad hose.
Best bet is to replace all three parts. Costs about $100 and takes an hour or so.
Your problem sounds like clutch hydraulics. It's either the master or slave cylinder failing, or a bad hose.
Best bet is to replace all three parts. Costs about $100 and takes an hour or so.
#3
Full Member
Did you use all new hydraulics? Did you properly bleed the system after installing them? It is either failed master/slave/hose, or air in the system, if they were not all new parts my money is on failed hydraulics.
#4
Can Post Only in New Member Section
Thread Starter
Join Date: Apr 2011
Location: eagle rock CA.
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
To zero 10, and pele........thanks you guys pointed me in the right direction, its nice to be on the same side. Thanks again bro's
#7
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
Any auto parts store will have the master, slave and hose. It may take a day for them to arrive, but I've never had an issue buying these parts at any regular auto parts store.