New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

Fun little rotary issues....

Thread Tools
 
Search this Thread
 
Old 06-24-12, 12:12 AM
  #1  
Junior Member
Thread Starter
 
NavyFD3S's Avatar
 
Join Date: Jun 2012
Location: Chesapeake, VA
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Fun little rotary issues....

So I bought this car recently..... Replaced the radiator.... Yet it still pukes up coolant every time I shut the car off and have to refill before I go anywhere....

Now tonight I have been fighting an issue where the car hesitates and bucks under partial/cruising throttle... doesn't matter the speed, happens under like 3k rpm. After driving for about 10-15 mins it drives normal again.

Whats up with these issues?
Old 06-24-12, 10:09 AM
  #2  
Engine, Not Motor

iTrader: (1)
 
Aaron Cake's Avatar
 
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes on 91 Posts
From where is it "puking" coolant? If it's the recovery bottle, first replace the pressure cap and hose running from the cap to the recovery bottle.

What year and model is the car?
Old 06-24-12, 04:34 PM
  #3  
Junior Member
Thread Starter
 
NavyFD3S's Avatar
 
Join Date: Jun 2012
Location: Chesapeake, VA
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
it is puking coolant from the overflow tank..... 1993 fd twin turbo
Old 07-03-12, 12:08 PM
  #4  
Junior Member
Thread Starter
 
NavyFD3S's Avatar
 
Join Date: Jun 2012
Location: Chesapeake, VA
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Well I did a pressure test on the system and it came back good... no leaks found
Old 07-03-12, 12:09 PM
  #5  
Junior Member
Thread Starter
 
NavyFD3S's Avatar
 
Join Date: Jun 2012
Location: Chesapeake, VA
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
also, removed the coolant expansion tank from the system....
Old 07-05-12, 06:20 PM
  #6  
Junior Member

iTrader: (2)
 
racerzedge77's Avatar
 
Join Date: Nov 2011
Location: Bowden, AB
Posts: 20
Likes: 0
Received 0 Likes on 0 Posts
PE

Hey NavyFD3S, the rotary engine will buck/hesitate during cruising if it is not brought up to operating temp. I had the same issue with mine when i first got it. Most say to stay below 4000 rpm until it warms up.Just a thought. Do you mean AST( Air seperator tank) when u say expansion tank?
Old 07-07-12, 08:43 PM
  #7  
Junior Member
Thread Starter
 
NavyFD3S's Avatar
 
Join Date: Jun 2012
Location: Chesapeake, VA
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Sweet thanks.... yeah... removed the ATS and am not connected to my overflow tank.... seems to be working really well.. haven't had any issues since.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
wickedrx2
The Bad & Fugly Members
10
06-10-21 06:28 PM
Steven_McKinley
General Rotary Tech Support
12
09-05-15 10:48 AM
Murilli
Midwest RX-7 Forum
0
09-03-15 09:10 AM



Quick Reply: Fun little rotary issues....



All times are GMT -5. The time now is 03:44 AM.