fresh built hybrid 13b.. igniton timing?
#1
Junior Member
Thread Starter
Join Date: Jun 2010
Location: newjersey
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
fresh built hybrid 13b.. igniton timing?
Hey guy my gslse is running but I'm not sure about the timing.
The motor is 91 turboII irons with large streetport, gslse crank and n/a 91 rotors. Real jay tech intake and holley. Stock dizzy with msd coils and good wires.
My issue is the factory crank pully only has marks for tdc. That where I put it to start the motor, and id does and runs... but I can't get a good tune on the carb with it off time. Now RB says 6 degree bdc for leading but I can't remember which direction that is.... and am open for suggest for tuning also.
The motor is 91 turboII irons with large streetport, gslse crank and n/a 91 rotors. Real jay tech intake and holley. Stock dizzy with msd coils and good wires.
My issue is the factory crank pully only has marks for tdc. That where I put it to start the motor, and id does and runs... but I can't get a good tune on the carb with it off time. Now RB says 6 degree bdc for leading but I can't remember which direction that is.... and am open for suggest for tuning also.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
immanuel__7
2nd Generation Specific (1986-1992)
89
09-05-15 10:23 AM