Frame Problems
04-13-11, 07:24 PM
#1
rusty everything
Thread Starter
Frame Problems
Hey guys i was workin on my sa and when i was raising it with the spare tire jack the frame buckeled in on itself, has this happened to anyone else?? and is there a safe way to remove the dent??
04-14-11, 08:57 AM
#2
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
The frame is not a lifting point. The pinch welds directly in front/behind each wheel is.
If it is just minor damage, you can probably use a set of Vice Grips to bend it back. If it is larger damage it may take a significant amount of pounding with a backing dolly and a large hammer. It all depends on how the damage is done.
If it is just minor damage, you can probably use a set of Vice Grips to bend it back. If it is larger damage it may take a significant amount of pounding with a backing dolly and a large hammer. It all depends on how the damage is done.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
The1Sun
1st Generation Specific (1979-1985)
7
09-18-15 07:13 PM