FC3 Rx 4 Lug To 5 Lug Swap? Little Help Please.
#1
Can Post Only in New Member Section
Thread Starter
Join Date: Jun 2010
Location: WA
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
FC3 Rx 4 Lug To 5 Lug Swap? Little Help Please.
Looking into getting my boyfriend a 5 lug swap for his 87 rx7 for his birthday. Not my car so I don't know much about it , so please any help would be amazing.
Im looking at a full subframe off the same year but a 5 lug. but it is missing rear calipers and rotors.
Would his 4 lug calipers and rotors work for the 5 lug set? Or would I need to buy him some new ones that are for the 5 lug?
Also anything else I that I need to know about what I might need to change would be amazing <3
Thank You Very Much!!
Oh and yes, I know I don't need the whole subframe but it comes with good suspention and his is basically shot.
Im looking at a full subframe off the same year but a 5 lug. but it is missing rear calipers and rotors.
Would his 4 lug calipers and rotors work for the 5 lug set? Or would I need to buy him some new ones that are for the 5 lug?
Also anything else I that I need to know about what I might need to change would be amazing <3
Thank You Very Much!!
Oh and yes, I know I don't need the whole subframe but it comes with good suspention and his is basically shot.
#2
Top Down, Boost Up
iTrader: (7)
This thread sums it up fairly well: https://www.rx7club.com/2nd-generation-specific-1986-1992-17/do-i-have-all-parts-i-need-5-lug-swap-453739/. The 4-lug cars used smaller diameter brake rotors, so the brake calipers mounted differently. The rear rotors on a 4-lug car are also not vented, so they're thinner.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM