Failed Instrument cluster
#1
Failed Instrument cluster
Hey guys i need some help.
So, i was driving and i hit a bump a little hard,nothing major and here in VA we have a lot of those.
and my dashboard slips off and hit the plastic of my instrument panel.
everything stopped working besides my speedometer which has been,now, acting funny.
i checked my relay and it was fine. and nothing was unplugged from my ECU. All the wires connected to the board on the back of the IC was in and firm.
So i'm lost.
I am a noobie and help would be great. thanks guys.
So, i was driving and i hit a bump a little hard,nothing major and here in VA we have a lot of those.
and my dashboard slips off and hit the plastic of my instrument panel.
everything stopped working besides my speedometer which has been,now, acting funny.
i checked my relay and it was fine. and nothing was unplugged from my ECU. All the wires connected to the board on the back of the IC was in and firm.
So i'm lost.
I am a noobie and help would be great. thanks guys.
#2
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
Dylan..add your CAR SERIES the next time you ask for helps so people can help you faster and easier.(see thread up top of this section).
INFO: 1990 FC Vert.
INFO: 1990 FC Vert.
#4
I printed out the wiring diagrams and I thought it connected to the main fuse and then to the ecu. But I check every relay and fuse and everything is getting voltage and Is functioning. All wires are plugged in. I assume I have a short somewhere but it doesn't make sense to me because all I did was hit a bump.
#5
Moderator
iTrader: (1)
I said 'Meter fuse" and not Main fuse (Meter,Meter,Meter,Meter.................). The Meter fuse is in the interior fusebox and again, relays have nothing to do with your gauge cluster.
Link to fusebox pic: https://www.rx7club.com/2nd-generati...faq-fc-494667/
Link to fusebox pic: https://www.rx7club.com/2nd-generati...faq-fc-494667/
Last edited by satch; 09-14-13 at 08:45 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Vendor Classifieds
12
10-17-20 03:25 PM