Cruise control not working (HELP)
#1
Junior Member
Thread Starter
Cruise control not working (HELP)
Got my 1990 RX7 convertible transmission rebuilt about a year ago and the cruise doesn't work. The light comes on but no response. Any suggestions?
The following users liked this post:
SharonG (10-29-17)
#3
Urban Combat Vet
iTrader: (16)
Have you tried looking at the appropriate Factory Service Manual?
Not familiar with the FC's, but on the FD, there are four components to the CC...(1) The actuator-located in the engine bay with a cable running to the throttlebody. (2) The power switch, (3) The control switches on the steering wheel (i.e. resume, set, accel and cancel) and (4) the CC CPU or control module.
Regardless, bump for an FC guy.
Not familiar with the FC's, but on the FD, there are four components to the CC...(1) The actuator-located in the engine bay with a cable running to the throttlebody. (2) The power switch, (3) The control switches on the steering wheel (i.e. resume, set, accel and cancel) and (4) the CC CPU or control module.
Regardless, bump for an FC guy.
The following users liked this post:
SharonG (10-29-17)
#4
Junior Member
Thread Starter
Thanks
thanks for the input. Guess I’ll have to obtain a manual. I appreciate the response. I replaced the box that’s by the fuses but no change. I suppose I’ll just have to get my hands dirty. So much for the manicure. Lol!
The following users liked this post:
SharonG (10-29-17)