Cleaning Engine ?
10-25-11, 09:31 AM
#2
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
A good degreaser (I like Castrol Super Clean), a brush, and some effort. Spray the degreaser on full strength while keeping it away from the alternator and other accessories with bearings. Let it sit about 10 minutes. Then rinse clean with a hose. Now cut it to about 30% Super Clean/70% water. With a stiff bristle brush, scrub out all the hard areas. Rinse again. Repeat as many times as necessary. Start the engine to dry it off.
Now when you wash the car, all it should take is a spray bottle with water and dish soap to keep it clean.
Now when you wash the car, all it should take is a spray bottle with water and dish soap to keep it clean.
10-25-11, 10:34 AM
#3
I use plastic grocery bags with rubber bands over the relay and fuse boxes. Pressure wand with water only. Careful not to get too agressive/close around small hoses and solenoids. Compressed air if you have it to dry the blingy stuff and run the engine to dry everything else.
Thread
Thread Starter
Forum
Replies
Last Post
cdn
2nd Generation Specific (1986-1992)
14
09-10-15 06:23 AM
cdn
2nd Generation Non-Technical and pictures
0
08-11-15 08:59 PM