New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

cant get my door panel off my 1988 turboII

Old May 8, 2009 | 12:20 PM
  #1  
FC3Sthebest's Avatar
Thread Starter
Full Member
 
Joined: Feb 2009
Posts: 53
Likes: 0
From: Reisterstown, Maryland
cant get my door panel off my 1988 turboII

So I have it off its just hanging by something in the middle I have no idea what it is, I tried to remove the arm rest completely but it is connected to the cardboard/Carpet matt. But all the screws are stripped off so they wont come off. any way I figure there is a way easier way to do this. I am really stumped all the visible screws are removed. Any help?
Reply
Old May 8, 2009 | 01:52 PM
  #2  
Aaron Cake's Avatar
Engine, Not Motor
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Feb 2001
Posts: 29,798
Likes: 128
From: London, Ontario, Canada
You will need to remove the arm rest in order to remove the panel. The arm rest screws into the door skin. Make sure you are removing the hidden screw under the cap.
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 02:52 PM.