Body harness help, 88 rx7 s4 t2
Thread Starter
Junior Member
Joined: Jan 2016
Posts: 10
Likes: 0
From: Pennsylvania
Body harness help, 88 rx7 s4 t2
Hi guys,
recently pulling stuff out and cut through the body harness not realizing what I did until after I did it
I need to know, from the harness on the drivers side which is now a stub (as I planned on ripping it all out) what color wires and which ones I need for : Headlights, headlight up and down, blinkers, 4 ways, wiper power and control and which ones are powers so I can power the rest of the car. And please don't ask or say "did you search?" Yes I did, this is a forum and is meant to help people and each other out so that's all I'm asking for. Maybe a wire tab or pinout of that harness from the engine bay in or from in the cabin to the engine bay. Thanks!f
recently pulling stuff out and cut through the body harness not realizing what I did until after I did it
I need to know, from the harness on the drivers side which is now a stub (as I planned on ripping it all out) what color wires and which ones I need for : Headlights, headlight up and down, blinkers, 4 ways, wiper power and control and which ones are powers so I can power the rest of the car. And please don't ask or say "did you search?" Yes I did, this is a forum and is meant to help people and each other out so that's all I'm asking for. Maybe a wire tab or pinout of that harness from the engine bay in or from in the cabin to the engine bay. Thanks!f
Joined: Sep 2005
Posts: 25,581
Likes: 136
From: Smiths Falls.(near Ottawa!.Mapquest IT!)
you can get wiring info at Foxed.ca
The body harness does not feed the wiper motor itself though as the connector is intertwined with the passenger side engine harness.
With all the wiring connectors that you need to do I would be sourcing a whole Chassis Harness.I would not trust a group of crimp on or soldered connections as massive as what you need to do to achieve a full chassis harness.
The body harness does not feed the wiper motor itself though as the connector is intertwined with the passenger side engine harness.
With all the wiring connectors that you need to do I would be sourcing a whole Chassis Harness.I would not trust a group of crimp on or soldered connections as massive as what you need to do to achieve a full chassis harness.