blitz dual sbc boost controller not changing boost
#1
Can Post Only in New Member Section
Thread Starter
Join Date: Mar 2010
Location: los angeles
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
blitz dual sbc boost controller not changing boost
ok heres the issue i have an 1972 rx2 with an 1989 turbo 2 13b in it have an upgraded bosh fuel pump and an areo motive fpr costum headers and an upgaded turbo t3/t4 with a 7psi internal wategate. i installed an blitz dual sbc spec s boost contoller i had lying around. but i cant get the boost to increase at all cant get the boost to go over .51 bars witch is about 7.2-7.3 psi. im trying to get to 10 psi or even more if possible but cant get over 7 or so can some one help.
#3
Can Post Only in New Member Section
Thread Starter
Join Date: Mar 2010
Location: los angeles
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
the controller has pluming. i am using the stock ecu, is the stock boost solenoid the pressure sensor if so i removed the line and blocked it off but that didnt help
#5
Can Post Only in New Member Section
Thread Starter
Join Date: Mar 2010
Location: los angeles
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
can someone help me out here is a video of how i have the controller hooked up
http://www.youtube.com/user/VATOCLOWN1
http://www.youtube.com/watch?v=KhyBaUehWCU
http://www.youtube.com/user/VATOCLOWN1
http://www.youtube.com/watch?v=KhyBaUehWCU
#6
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
Everything looks correct in your video but I'm not really familiar with this specific boost controller. Does it have a setting for the type of wastegate used? Make sure that it is set to a swing valve/flapper and not a poppet type.
How many ports does the solenoid have?
How many ports does the solenoid have?