Andr3s from Mexico
#1
Can Post Only in New Member Section
Thread Starter
Join Date: Nov 2010
Location: Mexico
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Andr3s from Mexico
Hi all!
I am Andres from Monterrey, Mexico, I bought a FC Turbo II, I have a problem now with my FC... only works 1 rotor and I dont know why, I change the spark plugs and the spark plug wires but continious working only 1 rotor. anyone have some idea that could be?
here are some pictures
I am Andres from Monterrey, Mexico, I bought a FC Turbo II, I have a problem now with my FC... only works 1 rotor and I dont know why, I change the spark plugs and the spark plug wires but continious working only 1 rotor. anyone have some idea that could be?
here are some pictures
#2
Moderator
iTrader: (3)
welcome to the board.
let me guess ... the rear one? i suppose you could go through the motions and check the fuel and spark going to the dead rotor, but i think you will find that that's what you have ... a dead rotor. do a compression test and start getting parts (or money) together for a rebuild.
let me guess ... the rear one? i suppose you could go through the motions and check the fuel and spark going to the dead rotor, but i think you will find that that's what you have ... a dead rotor. do a compression test and start getting parts (or money) together for a rebuild.
#6
ok, when you take out the 2 that are wet, check to see what is on it. is it fuel or engine coolant? also check to see if your getting spark. if spark is fine on the the 2 that is wet, you might have a bad coolant seal
Thread
Thread Starter
Forum
Replies
Last Post