Alarm install and power locks
#1
Junior Member
Thread Starter
Join Date: Dec 2009
Location: Caledon, Ontario, Canada
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Alarm install and power locks
I tried doing a search on this but no dice. Here's the scenario: my fd had an ancient viper so I decided to upgrade to a newer 2 way viper. I've wired all the main components and it's all working fine. However, my passenger lock is not working at all. The driver door has an aftermarket actuator but the passenger door doesn't. Did I screw something up or do I need to add another actuator on the passenger door? Also, I wouldn't mind hooking up the remote start feature but the installation manual doesn't give me much info on it. Does anyone know if there is some kind of wiring diagram available? Any and all help will be appreciated.
Cheers,
Dan
Cheers,
Dan
#3
Full Member
i'm pretty sure all FD/FC owners have to deal with a broken window switch at some point. lowest price i could find was 150+10 shipping from Malloy Mazda. i wouldnt waste the money buying a used one since it will probably break too.
#4
Junior Member
Thread Starter
Join Date: Dec 2009
Location: Caledon, Ontario, Canada
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
the windows were working before I pulled out the old alarm. Do you think it's coincidence? It seems to me that it's somehow related to the passenger power lock not working but then again this is my first time doing any kind of electronic work on a Mazda. I searched for wiring schematics on the power lock system and the power windows with no luck.
Thread
Thread Starter
Forum
Replies
Last Post