Air pump bolt question
05-30-12, 08:20 PM
#1
Full Member
Thread Starter
Air pump bolt question
Does anyone know the dimensions for the air pump bolt on a 90 stock vert. It's the bolt on the slider, not the pivot point bolt. Mine snapped inside and there's not enough on the head to get a proper measurement from it. I'm just going to buy a better bolt and washer so it shouldn't do that again, at least for awhile.
05-31-12, 10:37 AM
#4
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
I've been through that too.Bolt snaps.
If you can drill the steel bolt out(pain in the ***),rather than trying to save threads make the hole a smooth hole,and put a bolt and nut on it.
If you can drill the steel bolt out(pain in the ***),rather than trying to save threads make the hole a smooth hole,and put a bolt and nut on it.
05-31-12, 11:20 AM
#5
Full Member
Thread Starter
I thought about doing that, but if I'm able to save the thread I'll just buy a normal bolt, otherwise that was plan B.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
12abridgeport
1st Generation Specific (1979-1985)
2
08-17-15 06:28 PM
