AC removal
08-27-10, 04:32 PM
#1
Full Member
Thread Starter
AC removal
the AC in my 89 turbo does not work and i dont want to spend 1900 on fixing it so i would like to know how to remove the whole set up. pictures, links replies anything will help.
Thank you
Thank you
08-29-10, 12:44 PM
#2
A detailed how-to is not necessary.
1) Take it to a shop that will discharge it properly.
2) The A/C system forms a loop of tubing. Find the nearest A/C part and remove it. Remove each piece attached to it. Continue until you're out of parts or you run out of things within your abilities / motivation to remove.
3) If you've removed the compressor, determine the correct new belt to use without the compressor in place or install an appropriate idler pulley. I don't own an 89 so offhand I can't suggest your final answer but that's the basic idea on compressor removal.
Dave
1) Take it to a shop that will discharge it properly.
2) The A/C system forms a loop of tubing. Find the nearest A/C part and remove it. Remove each piece attached to it. Continue until you're out of parts or you run out of things within your abilities / motivation to remove.
3) If you've removed the compressor, determine the correct new belt to use without the compressor in place or install an appropriate idler pulley. I don't own an 89 so offhand I can't suggest your final answer but that's the basic idea on compressor removal.
Dave
Thread
Thread Starter
Forum
Replies
Last Post
Erosangel
3rd Generation Specific (1993-2002)
5
09-18-15 04:06 PM
