93 FD RX7 Auto to Manual Conversion
#26
Junior Member
Join Date: Feb 2013
Location: orange county
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
#27
Junior Member
Join Date: Apr 2013
Location: sutton, ak
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
What if you did like a front clip? I'm looking at a 85 two actually that are autos in amazing shape. And was gonna do like a 13b turbo front clip with a manual how much work would be involved than? Like is there anything that wouldn't work?
#28
Full Member
iTrader: (3)
Join Date: Oct 2007
Location: Bronx new york
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
Videos
Hey guys
Just let you know I started post the videos on YouTube of the tranny swap
Look them up
Rx7 tranny swap part 1
Under sleepydogz
I'll have more coming but will need to wait on an air compressor that I would like to order but it's a start
Let me know what you think and let some people know about it too
Thanks jc
Just let you know I started post the videos on YouTube of the tranny swap
Look them up
Rx7 tranny swap part 1
Under sleepydogz
I'll have more coming but will need to wait on an air compressor that I would like to order but it's a start
Let me know what you think and let some people know about it too
Thanks jc
#29
Junior Member
Join Date: Jul 2014
Location: palm springs
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
I believe you need a different rear housing, another motor is need. So 1800 dollars for a jdm motor that may be in good shape, which comes with a transmission. so now you need a slave cylinder with separate slave cylinder oil tank. Then a brake pedal. I believe the shiftier will fit no problem. I bet with a JDM motor you can do it for around 3k.
https://www.mazdatrix.com/b1.htm
https://www.mazdatrix.com/b1.htm
#30
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
I did a S5 Trans to an FD auto rear iron.,
I made a L shaped Bracket to the 2 bolts that held the Auto Starter on and then created a hole for a bolt so the Bolt hole on the trans would have something to hold to.
To do the swap "correctly" Yes,a Manual rear iron should be sued BUT you can get away with an FD Auto rear iron to hook up to the FD Manual trans.
I made a L shaped Bracket to the 2 bolts that held the Auto Starter on and then created a hole for a bolt so the Bolt hole on the trans would have something to hold to.
To do the swap "correctly" Yes,a Manual rear iron should be sued BUT you can get away with an FD Auto rear iron to hook up to the FD Manual trans.
#31
Full Member
iTrader: (3)
Join Date: Oct 2007
Location: Bronx new york
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
Thanks
I did a S5 Trans to an FD auto rear iron.,
I made a L shaped Bracket to the 2 bolts that held the Auto Starter on and then created a hole for a bolt so the Bolt hole on the trans would have something to hold to.
To do the swap "correctly" Yes,a Manual rear iron should be sued BUT you can get away with an FD Auto rear iron to hook up to the FD Manual trans.
I made a L shaped Bracket to the 2 bolts that held the Auto Starter on and then created a hole for a bolt so the Bolt hole on the trans would have something to hold to.
To do the swap "correctly" Yes,a Manual rear iron should be sued BUT you can get away with an FD Auto rear iron to hook up to the FD Manual trans.
Thread
Thread Starter
Forum
Replies
Last Post
maikelc
3rd Generation Specific (1993-2002)
8
08-24-15 11:04 AM
KAL797
Test Area 51
0
08-11-15 03:47 PM
93, auto, automatic, conversion, convert, converting, cost, fd, fdrx7, fs, manual, rx7, speed, swap, transmission