Just bought my 1993 rx7 not that long ago and was even at the dfw rx7 meet a week or so ago but anyways, does anyone by chance have a diagram showing the pin out for the two door molex connectors? My radio harness is pretty butchered with random speakers working and not working, the harness is cut back pretty far into the dash so I dont have much working room either. (some one also glued the cuby under the radio in ...~_~ This is going to be a fun car i can tell already)

So I was planing on splicing the wiring directly at the molex and bypass the mess the previous person made.

 

the fsm will probably help u alot in this area. there's probably a sticky thread in the 3rd gen section that u can download a copy of the manual. but if i were in ur position and the harness is badly butchered i'd just run new wiring into the doors for the speakers, or the entire stereo system for that matter.

 

Was thinking of running new wiring but drilling though the plastic molex was kinda intimidating me. I will probably do that later when I buy some real speakers to replace whatever is currently in the doors. (its yellow and thats all I know lol, rears are old clarions that sound good .)

 

Check out the FSM links at the bottom right here:http://www.wrex-racing.com/web/fd/info.htm and see if there is anything that can help.
You also might be able to pick-up a decent used dash harness (which I think is what yout talking about) in the 3rd Gen parts for sale/want to buy section.

 

It's the "wiring diagram" or "body electrical troubleshooting" manuals you're interested in. Both are available from the links in this forum.

https://www.rx7club.com/3rd-gen-archives-73/tech-manual-directory-614824/

 

Pimptastic thanks guys.