New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

86 gxl secondary injectors fail!

Thread Tools
 
Search this Thread
 
Old Sep 12, 2010 | 11:31 AM
  #1  
pjmcgrath's Avatar
Thread Starter
Can Post Only in New Member Section
 
Joined: Sep 2010
Posts: 2
Likes: 0
From: texas
86 gxl secondary injectors fail!

with my secondary injectors plugged in it sputters very bad between 4k to 6k and wont rev past 6k. but when i unplug them it revs fine. i pulled the injectors out and tested them and they seem to work fine. what could be causing it to run terrible with them plugged in?
Reply
Old Sep 13, 2010 | 09:52 AM
  #2  
Aaron Cake's Avatar
Engine, Not Motor
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Feb 2001
Posts: 29,798
Likes: 128
From: London, Ontario, Canada
Check your grounds. http://www.aaroncake.net/rx-7/grounding.htm

Check your pressure/boost sensor.

Finally, have all 4 injectors professionally cleaned by an injection shop.
Reply
Old Sep 13, 2010 | 11:20 PM
  #3  
pjmcgrath's Avatar
Thread Starter
Can Post Only in New Member Section
 
Joined: Sep 2010
Posts: 2
Likes: 0
From: texas
i have added the ground to the pressure sensor and installed fresh wire through the harness and under the intake for the ecu ground. now it runs pretty good until i get to 5k under a load and it sputters and wont go past 5k??
Reply
Old Sep 15, 2010 | 09:29 AM
  #4  
Aaron Cake's Avatar
Engine, Not Motor
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Feb 2001
Posts: 29,798
Likes: 128
From: London, Ontario, Canada
Did you check and test the pressure sensor, and have the injectors cleaned?

Also, check your TPS.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
bryancmatthews
Power FC Forum
14
Oct 5, 2015 08:49 PM
ZacMan
Build Threads
4
Sep 19, 2015 09:20 PM




All times are GMT -5. The time now is 08:05 AM.