5 Lug Conversion on S4
#1
Junior Member
Thread Starter
Join Date: Jan 2013
Location: Southern California
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
5 Lug Conversion on S4
I'm planning to do a 5 lug conversion on my s4. I found an S5 convertible that was parting out, and I was wondering if the parts for the conversion off the convertible will fit on my coupe? Sorry if its a dumb question. I tried searching it up but got no results.
#2
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
Look up 5 lug swap.
it is commonly asked.
Make sure the S5 has 4 piston calipers up front or it is a waste of time.
The rear assembly is needed.
Be in for a "treat" if you have to replace Toe bushings though.You can get away with using the 4 lug spindle up front.If you want to use the 5 lug spindle it is OK too.
But as I said the info is posted.Recently too in SEC Gen Specific.
it is commonly asked.
Make sure the S5 has 4 piston calipers up front or it is a waste of time.
The rear assembly is needed.
Be in for a "treat" if you have to replace Toe bushings though.You can get away with using the 4 lug spindle up front.If you want to use the 5 lug spindle it is OK too.
But as I said the info is posted.Recently too in SEC Gen Specific.
Thread
Thread Starter
Forum
Replies
Last Post