New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

45 weber dcoe won't run right

Thread Tools
 
Search this Thread
 
Old Mar 16, 2016 | 12:51 AM
  #1  
LocoLeo7's Avatar
Thread Starter
Can Post Only in New Member Section
 
Joined: Mar 2016
Posts: 1
Likes: 0
From: San Bernardino
45 weber dcoe won't run right

Hi I have a 91 13b stock with a side draft 45 dcoe..just installed it did the timing now it doesn't run right ..not sure which air correction jets / main jets & idle jets im supposed to be using .id really appreciate any help thanks
Reply
Old Mar 23, 2016 | 10:26 AM
  #2  
CrazyWaldo's Avatar
Junior Member
 
Joined: Jan 2016
Posts: 9
Likes: 0
From: Clarksville, Tn
Originally Posted by LocoLeo7
Hi I have a 91 13b stock with a side draft 45 dcoe..just installed it did the timing now it doesn't run right ..not sure which air correction jets / main jets & idle jets im supposed to be using .id really appreciate any help thanks
Might have to adjust it, and google what others have done with your setup. If the jetting is to far off it wont run right. Maybe try and find someone in your area and see if they can help you tune it. Carbs can be a real pain but once they're adjusted and tuned they should run pretty good.
Reply
Old Mar 25, 2016 | 12:44 AM
  #3  
stevo9494's Avatar
Full Member
iTrader: (3)
 
Joined: Aug 2015
Posts: 80
Likes: 3
From: DFW
I use to have a carbed bike, and using a wide band AFR gauge with the proper o2 sensor was pretty helpful.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Leeroy_25
20B Forum
8
Mar 19, 2016 04:22 AM
Joshowen
General Rotary Tech Support
7
Mar 17, 2016 11:50 PM
Ablake6620
New Member RX-7 Technical
5
Mar 11, 2016 06:15 PM




All times are GMT -5. The time now is 10:22 PM.