New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

2 simple questions (s5 t2)

Thread Tools
 
Search this Thread
 
Old May 21, 2010 | 02:50 PM
  #1  
MyLastEcstasy's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Nov 2004
Posts: 106
Likes: 0
From: Richmond, VA
VA 2 simple questions (s5 t2)

s5 t2

Are all the manifold studs the same?

All the studs need to be replaced but it seems like the bottom left hole
is bigger.

Are their gasket or o rings for the turbo?

My turbo has a coolant leak. When I took of the coolant lines connected to the turbo, all I see is a washer. Should there be a gasket or o ring?
Reply
Old May 22, 2010 | 10:45 AM
  #2  
Aaron Cake's Avatar
Engine, Not Motor
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Feb 2001
Posts: 29,798
Likes: 128
From: London, Ontario, Canada
All the studs are the same.

The coolant feed to the turbo uses crush washers to seal the banjo bolts.
Reply
Old May 22, 2010 | 12:33 PM
  #3  
MyLastEcstasy's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Nov 2004
Posts: 106
Likes: 0
From: Richmond, VA
thanks
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
_Tones_
Adaptronic Engine Mgmt - AUS
10
May 25, 2021 05:37 AM
ZacMan
Build Threads
4
Sep 19, 2015 09:20 PM
Nosferatu
2nd Generation Specific (1986-1992)
7
Sep 5, 2015 02:13 PM




All times are GMT -5. The time now is 03:56 AM.