1988 Rx-7 Turbo Fresh Build exhaust temp and starting
05-25-09, 12:07 PM
#1
Junior Member
Thread Starter
Join Date: Feb 2008
Location: Houston
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
1988 Rx-7 Turbo Fresh Build exhaust temp and starting
Hi,
I have a two stage problem and need some help....(Im in Houston and their is no one here I would trust my car with).
My first problem starts with my exhaust temp getting two hot...past 3200 rpm's it just keeps climbing..(temp gauge is right after turbo)
My second problem is starting...way to rich at start
.......it was a problem that just got progressivley worse to the point where I would have to change sprak plugs every 50 miles....
Motor has approx.2500 miles on it with a Microtech ECU, Aeromotive Fuel Regulator
I have a two stage problem and need some help....(Im in Houston and their is no one here I would trust my car with).
My first problem starts with my exhaust temp getting two hot...past 3200 rpm's it just keeps climbing..(temp gauge is right after turbo)
My second problem is starting...way to rich at start
.......it was a problem that just got progressivley worse to the point where I would have to change sprak plugs every 50 miles....
Motor has approx.2500 miles on it with a Microtech ECU, Aeromotive Fuel Regulator
Thread
Thread Starter
Forum
Replies
Last Post
sherff
Adaptronic Engine Mgmt - AUS
9
02-24-19 12:09 PM
immanuel__7
2nd Generation Specific (1986-1992)
89
09-05-15 10:23 AM