New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

1980 SA Rx7 Engine Temperature Fluctuations

Thread Tools
 
Search this Thread
 
Old Oct 23, 2016 | 02:26 PM
  #1  
UnregisteredSA22C's Avatar
Thread Starter
Full Member
Tenured Member: 5 Years
 
Joined: Oct 2016
Posts: 85
Likes: 37
From: Alberta
1980 SA Rx7 Engine Temperature Fluctuations

I've starting driving my 80 rx7 after rebuilding the stock 12a. I'm still taking it easy, and I haven't had it above 4k rpm. I have the racingbeat carb, intake, and exhaust.

I've noticed that the temperature gauge in the dash will creep up if i have the engine around 3k rpm, and drop almost immediately when I idle it. Other times it doesn't rise at all, but most of the time it sits around 3/4 of the way up. I have a laser thermometer and I've been pulling over to check the engine temperature in different places (water pump, oil pan, spark plug side, header, etc) but I've never seen any significant or worrying increase.

Has anyone else seen this issue? It just really goes against my grain to keep driving when the temp gauge is climbing in front of my eyes and I'm curious what others think about the problem.
Reply
Old Oct 23, 2016 | 02:31 PM
  #2  
roTAR needz fundZ
Tenured Member 15 Years
iTrader: (1)
 
Joined: Aug 2002
Posts: 2,614
Likes: 31
From: Freeland, MI
Get and install a aftermarket temp gauge, the stock ones are old and inaccurate
Reply
Old Oct 23, 2016 | 02:38 PM
  #3  
UnregisteredSA22C's Avatar
Thread Starter
Full Member
Tenured Member: 5 Years
 
Joined: Oct 2016
Posts: 85
Likes: 37
From: Alberta
Thanks for the advice! I'm really relieved to hear you say that. Don't suppose you have any recommendations for a product?
Reply
Old Oct 29, 2016 | 02:23 PM
  #4  
kardoktor1's Avatar
Junior Member
 
Joined: Oct 2016
Posts: 13
Likes: 0
From: WA near Spokane
Equus makes some decent ones, EZ to install.
Reply




All times are GMT -5. The time now is 04:44 AM.