Is this 12a worth using?
#1
Junior Member
Thread Starter
Join Date: May 2014
Location: Kitchener
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Is this 12a worth using?
Hey there, I got a dirt cheap 81, and the engine was in the trunk with the oil pan and front cover taken off. I took some pictures of most of the car and parts. If someone could help me out, that would be great, thanks.
#4
Junior Member
Thread Starter
Join Date: May 2014
Location: Kitchener
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
If I tear it down, and it's still good, can I use a gasket kit such as the one from atkins?
https://www.atkinsrotary.com/store/7...s-tab-comments
https://www.atkinsrotary.com/store/7...s-tab-comments
#5
roTAR needz fundZ
iTrader: (1)
Its for a 12a, so yes you can. All the other info you need to teardown and inspect it is at www.foxed.ca
Also, teardown and inspect first, then order parts
Also, teardown and inspect first, then order parts
Thread
Thread Starter
Forum
Replies
Last Post
Rotary Alx
General Rotary Tech Support
2
10-07-08 01:19 PM
$150FC
Single Turbo RX-7's
4
01-14-04 03:33 PM