dead_fc

iTrader: (1)

you right i dont know if my motor just needs to be rebuilt b/c i dont have the tools to take it apart so i have no idea if the engine needs new rotor housings or new rotors but i know that the first thing that i need to do is get the engine out of the car but i dont wana mess the car up even more b/c of me not knowing that i am doing if i am lucky then i just need to rebuild it so if any one wants to help me i will be back the 30th and will be ready to pull it out on the 31 if any one is willing to help

88 vert

im gonna need a TII exhaust and clutch, if anyone has one laying around let me know. Hey wheres joe been? Hes turned into one of those honduh boys, hanging out on the honda forum instead of here!!!! We outta go confiscate his car.

88 vert

Well motor+tranny+wire harness is out laying on floor. Found out the reason why motor was running so shitty, half of the lines off the intercooler were not clamped and hanging off. Then the cat, or downpipe was clogged up,and it had a broken pass. side motor mount, along with no air filter, turbo seams to be alright no shaft play. Gotta order some parts, ACV block off, oil pan gasket(someone jacked it up on the pan), exhaust, and gaskets for the shifter and the bushing, and ill be ready to put it in the vert.

cafcwest

If you need some quick and local S4 TII parts, let me know. I've got a whole garage full of stuff.

For example, I have a completely UNCRACKED S4 turbo manny. I was so amazed when I pulled it off. They are ALWAYS cracked.

ANywho, if you need something, drop and line.

-Jayson

brianmcd

http://www.msprotege.com/ads/adimage...ntenttype=jpeg

My car iz teh famus!1!one!!!eleven!

Zach McAfee

DUDE SWEET

Ok, so should I do a TII conversion for the GTU with some sort of standalone instead of buying a carb & intake manifold for the N/A for $900?

cafcwest

Well I've only got one complete turbo motor. What I have lots of, and am looking to get rid of, is stuff like:
2 sets of S4 TII intake manifolds, with tb's, tps, etc.
2 top mount IC's
S4 turbo in need of rebuild
UNCRACKED S4 turbo manifold
Grey rear back seats
Bunches of oil coolers
2 S4 turbo wiring harnesses (one all stock with S5 injector plugs, one stripped of all emissions)
2 S4 tubro ECU's

Stuff like that.

probably gonna bump a lot of this stuff to the general for sale section soon. just let me know what you need guys.

-jayson

ShogunOfHarlem

iTrader: (1)

Hello, I am buying a 3rd gen 7 and I wanted to know if you all knew of any good shops to get my engine/turbos rebuilt around here in Richmond or NOVA. Also if you all know appx how much this process costs it would be a big help so that I know upfront what I need to put aside. I am getting a 93 black FD within the next few weeks. It has 62k miles on it but I am sure it will need the rebuild soonish. I will get it compression tested but I just wanted to get a heads up before it arrives.


Thanks for any help,
Shogun

stevenson21

www.TuningSessions.com

cafcwest

Guys, if we have another day like this past Saturday any time soon, I pulling the grill out and inviting everyone over for a day of food, drinking, and RX7 festivities.
I know I, for one, stayed out side all day Saturday giving the 7 some love.

88 vert

most definately!!!!! my 7 got all kinds of attention TII motor is in the vert, all i got left is differental, exhaust and wire it up. Hope to be running soon, ordered turbo timer and B.O.V. today. I will have the RB header and presilencer for sale soon if anyone is interested.

CAFCWEST, you wouldnt happen to have a S4 TII AFM would you?

brianmcd

Happy bday mike.

~brian

ShogunOfHarlem

iTrader: (1)

I tried that website and It does not say anything about where they are or if they do engine rebuilds. Did I miss something?

Thanks,
Shogun

cafcwest

Yup, gimme a ring after 6pm. 687-6199.
-Jayson

cafcwest

Ok guys, I've been threatening to sell all my junk for a long time. Here it is:

https://www.rx7club.com/showthread.php?t=382378

Of course, all you local guys will get a discount, plus no shipping. Just let me know.

88 vert - Call me on that AFM.

andersonga

so...for the last month or 2 there's been a white fc, series 5 just sitting on brook road with "free to tow" written all over it...we tried to get info on it, it was registered in nc somewhere and i was gonna tow it...finally go tthe money and the time and a truck, rented a tow dolly...car was gone...so i got screwed out of 50 bux by uhaul...lesson learned, CHECK twice...anyway, if any of you guys saw it, see it, or got it yourselves, lemme know, it had a bunch of parts on it i desperatley needed and free was gonna be real cheap...anyway...keep em turnin, watch for pedestrians...10 points for the elderly and all that...

greg

88 vert

hey jayson ive been working daylights for the past 3 days, I seen your parts list. How much for AFM, TII uim, and vert tailights? I have a set of S5 vert lights but one is cracked. if you have IM, messsage me at djstdp1269@aol.,com.

cafcwest

PM sent

niburu

iTrader: (1)

I still need to find an inside drivers door handle assembly

-Dave-

falnfenix

BLOOOOOOOOOOOOOOO!!! sorry, i love that show..

niburu

iTrader: (1)

I had initially thought i was gonna hate it, about 3seconds into it I was hooked

falnfenix

same here.


damned cartoons...they own me.

cafcwest

What color?

Zach McAfee

Jayson, you wouldn't happen to have enough stuff to get me going on the TII conversion, would ya? Did I hear complete TII motor?

cafcwest

Well I DO have a complete S5 TII shortblock, but I haven't really been trying to get rid of it. THen again, almost everything has a price.

Come by a set of manifolds and an ECU and a harness or something. I know you got da chedda!

BTW, I've got like 5 UPS packages on the way to me right now...dont break any of my ****! Especially my intercooler...I've already spent too much on it.