I Need Help My Clutch Is Done
Thread Starter
NO PISTONS
Joined: Apr 2006
Posts: 108
Likes: 0
From: Baltimore, MD
I Need Help My Clutch Is Done
my clutch has just gone bad on me n i need s garage or shop(in MD/DC/VA) i can take it and put a new one in. Yes i do have another clutch. no i do not know how to put a clutch into my 1988 GTU but I'm willing to learn and do all the work just need a place to do it and some one to guide me. So if anyone can help or know someone that can help pleas pm me 
The Cause of Death
Joined: Mar 2004
Posts: 2,202
Likes: 2
From: New York
Dude it's relatively straight forward.
Follow procedure from the FSM. Make sure you align it correctly with the alignment tool they hopefully supplied you with. Change the pilot bearing and the throwout bearing while the tranny is out and you should be set. Put a bit of grease on both bearings, too.
PM me or IM me on aim and I'll give you a step by step. But read the FSM or Haynes first.
James
Follow procedure from the FSM. Make sure you align it correctly with the alignment tool they hopefully supplied you with. Change the pilot bearing and the throwout bearing while the tranny is out and you should be set. Put a bit of grease on both bearings, too.
PM me or IM me on aim and I'll give you a step by step. But read the FSM or Haynes first.
James
Thread
Thread Starter
Forum
Replies
Last Post