Steve Kan Tuning STL '08 (((April 5th-6th))) Confirmed List and Information Thread
#101
*** Bless The USA
Thread Starter
iTrader: (8)
Join Date: Jan 2007
Location: Saint Louis / Illinois
Posts: 7,139
Received 0 Likes
on
0 Posts
Eric
How's it going? Been a long time and I've been out the RX-7 circuit for a while from work and travel.
Have you heard from Ryan I've been trying to get hold of him?
Also I have not been driving my FD much. Probably drove <500 miles since last dyno. I've have new larger injectors as Kan suggested but have never installed them yet.
I plan to come out and hang out with you guys if thats OK. And if there is room for stand by I'd like to dyno the FD that is if I can get the new injectors installed in time.
My ABS pump is leaking because I ran Dot5 fluid and found out later that the bottle actually said not to be used in cars with ABS. My mistake for not reading direction.
Anyone know of a used or new ABS pump in good condition locally. For that matter is it rebuild able.
Let me know. Send me email or PM
Alex
How's it going? Been a long time and I've been out the RX-7 circuit for a while from work and travel.
Have you heard from Ryan I've been trying to get hold of him?
Also I have not been driving my FD much. Probably drove <500 miles since last dyno. I've have new larger injectors as Kan suggested but have never installed them yet.
I plan to come out and hang out with you guys if thats OK. And if there is room for stand by I'd like to dyno the FD that is if I can get the new injectors installed in time.
My ABS pump is leaking because I ran Dot5 fluid and found out later that the bottle actually said not to be used in cars with ABS. My mistake for not reading direction.
Anyone know of a used or new ABS pump in good condition locally. For that matter is it rebuild able.
Let me know. Send me email or PM
Alex
What's up Alex ! Been wondering where you've been hiding !
Yeah, stand by dyno time is always a go. Plenty of downtime from broke RX7's.
Of all people, I know you'll be down to party Saturday Night !
Ryan, he's hard to get ahold of. You might have luck sending him a pm on here, I've seen him post lately in the lounge. I'd hope that he'll show up next weekend.
#106
What's up Alex ! Been wondering where you've been hiding !
Yeah, stand by dyno time is always a go. Plenty of downtime from broke RX7's.
Of all people, I know you'll be down to party Saturday Night !
Ryan, he's hard to get ahold of. You might have luck sending him a pm on here, I've seen him post lately in the lounge. I'd hope that he'll show up next weekend.
Yeah, stand by dyno time is always a go. Plenty of downtime from broke RX7's.
Of all people, I know you'll be down to party Saturday Night !
Ryan, he's hard to get ahold of. You might have luck sending him a pm on here, I've seen him post lately in the lounge. I'd hope that he'll show up next weekend.
I hope to see you guys that weekend. I'm going to attempt installing new injectors tonite. Hope I don't break anything in the proccess.
Left you a voice mail on your new cell phone number.
Talk to you soon
Alex
#107
Man what a bitch it is to replace primary injectors!
I'm having to end up replacing oil lines as well since I have the top end out. Also found some kinked vacum lines. Now I know why I hate wrenching on the FD!
300RWHP at the wheels should have been good enough!
I'm having to end up replacing oil lines as well since I have the top end out. Also found some kinked vacum lines. Now I know why I hate wrenching on the FD!
300RWHP at the wheels should have been good enough!
#108
I Dislike Everything
iTrader: (1)
Join Date: Apr 2002
Location: St. Louis/Southern Illinois
Posts: 3,701
Likes: 0
Received 7 Likes
on
7 Posts
What's the name of the bar? I will stop by for sure. I don't have a cellphone, so yeah, how the hell will I know who to talk to first.
I can't walk around saying "the rx7club noes about jo0!"
I can't walk around saying "the rx7club noes about jo0!"
#109
*** Bless The USA
Thread Starter
iTrader: (8)
Join Date: Jan 2007
Location: Saint Louis / Illinois
Posts: 7,139
Received 0 Likes
on
0 Posts
I thought I pm'd you the info already, maybe I didn't.
You can just call me, I posted my cell number up above. Things don't usually start poppin til 2am, though.
#111
*** Bless The USA
Thread Starter
iTrader: (8)
Join Date: Jan 2007
Location: Saint Louis / Illinois
Posts: 7,139
Received 0 Likes
on
0 Posts
Ahh, common now. I have to be at a retirement party at 9am sunday morning which is a hour away. So, that means I'll be heading to church at 7am still drunk.
#116
*** Bless The USA
Thread Starter
iTrader: (8)
Join Date: Jan 2007
Location: Saint Louis / Illinois
Posts: 7,139
Received 0 Likes
on
0 Posts
Updated List, first 3 go on saturday. Last 3 go on sunday. Tuning starts at 9am, don't be late. I remove myself from the list, couldn't get things together in time. Also, Juice couldn't get his together in time either.
Steve Kan Tuning Information
Steve Kan will be in St.Louis from April 4th to April 7th. He'll be tuning on the April 5th-6th which falls on a saturday and sunday. His rate is $350 for a basic tune which requires a deposit of $200. Listed below is the pricing structure for custom tunes.
$350 - Stock turbo up to 12psi of boost (pump gas only) 1 map
$400 - Aftermarket turbo up to 16psi of boost (pump gas only) 1 map
$450 - Aftermarket turbo from 16psi - 25psi of boost (race gas and/or auxiliary injection only) 1 map
$600 - aftermarket turbo up to 25psi of boost (pump gas and race gas tune) 2 maps
Deposits can be sent to my address. I'll hand the deposits over to Steve when he arrives.
(Make checks out to Steve Kan)
Eric Cheatham
11 Lincolnshire BLVD
Belleville IL, 62221
__________________________________________________ ______________
Tuning list:
1. Bob Willis (Deposit Recieved)
2. Manvero (Deposit Received)
3. Gohan3rdrift (Deposit Received)
4. siguy2k (Deposit Received)
5. SupSai7 (Deposit Received)
6. w94rx7tt (Deposit Received)
__________________________________________________ ______________
DYNO INFORMATION
Dyno time is $85/Hr
Address is:
Tuxedo Park Racing
1401 Mississippi Ave
Bay #3
East St. Louis IL, 62201
Dyno List:
1. Bob Willis
2. Manvero
3. Gohan3rdrift
4. siguy2k
5. SupSai7
6. w94rx7tt
__________________________________________________ ______________
Everyone needs to make a checklist before Steve Kan arrives. This is what he said in an earlier post.
"Here're some items to inspect/replace before the dyno. New plugs (less than 1k miiles), new fuel filter (less than 5k miles), inspect spark plug wires, oil change, full tank of whatever gas you normally run, inspect tires (no nails or anything that can fly out during the dyno), inspect coolant fluid (change if necessary), clean air filter, put all the mods in that you plan to run before coming to the dyno (I don't think there'll be enough time to install them on the same day)."
If you want to be added to the list, please let me know asap.
Steve Kan Tuning Information
Steve Kan will be in St.Louis from April 4th to April 7th. He'll be tuning on the April 5th-6th which falls on a saturday and sunday. His rate is $350 for a basic tune which requires a deposit of $200. Listed below is the pricing structure for custom tunes.
$350 - Stock turbo up to 12psi of boost (pump gas only) 1 map
$400 - Aftermarket turbo up to 16psi of boost (pump gas only) 1 map
$450 - Aftermarket turbo from 16psi - 25psi of boost (race gas and/or auxiliary injection only) 1 map
$600 - aftermarket turbo up to 25psi of boost (pump gas and race gas tune) 2 maps
Deposits can be sent to my address. I'll hand the deposits over to Steve when he arrives.
(Make checks out to Steve Kan)
Eric Cheatham
11 Lincolnshire BLVD
Belleville IL, 62221
__________________________________________________ ______________
Tuning list:
1. Bob Willis (Deposit Recieved)
2. Manvero (Deposit Received)
3. Gohan3rdrift (Deposit Received)
4. siguy2k (Deposit Received)
5. SupSai7 (Deposit Received)
6. w94rx7tt (Deposit Received)
__________________________________________________ ______________
DYNO INFORMATION
Dyno time is $85/Hr
Address is:
Tuxedo Park Racing
1401 Mississippi Ave
Bay #3
East St. Louis IL, 62201
Dyno List:
1. Bob Willis
2. Manvero
3. Gohan3rdrift
4. siguy2k
5. SupSai7
6. w94rx7tt
__________________________________________________ ______________
Everyone needs to make a checklist before Steve Kan arrives. This is what he said in an earlier post.
"Here're some items to inspect/replace before the dyno. New plugs (less than 1k miiles), new fuel filter (less than 5k miles), inspect spark plug wires, oil change, full tank of whatever gas you normally run, inspect tires (no nails or anything that can fly out during the dyno), inspect coolant fluid (change if necessary), clean air filter, put all the mods in that you plan to run before coming to the dyno (I don't think there'll be enough time to install them on the same day)."
If you want to be added to the list, please let me know asap.
#119
I Dislike Everything
iTrader: (1)
Join Date: Apr 2002
Location: St. Louis/Southern Illinois
Posts: 3,701
Likes: 0
Received 7 Likes
on
7 Posts
Eric,
How long do you guys expect to run for? I hope you will be going late into the night.
I will give you a call when I get off of work. You better answer too damnit!
How long do you guys expect to run for? I hope you will be going late into the night.
I will give you a call when I get off of work. You better answer too damnit!