Hey Iowa
02-21-07, 09:59 PM
#376
Got Rotors?
iTrader: (1)
Join Date: Aug 2004
Location: Des Moines, Iowa
Posts: 580
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Love my RX7
1993 Mazda RX7
about 74,000 miles
Red with black leather interior
Bose System (I took the bose system out to put aftermarket in but still have Bose)
Greddy Exaust
Does not start due to possible coolant seals or something with fuel (injectors, pump, filter)
The drivers side door handle broke off when it was really cold out.
Does need some TLC but I am willing to work something out.
I have to systems if anyone is interested that I can add. One retails around $500 and the other retails about $5000-6000+
about 74,000 miles
Red with black leather interior
Bose System (I took the bose system out to put aftermarket in but still have Bose)
Greddy Exaust
Does not start due to possible coolant seals or something with fuel (injectors, pump, filter)
The drivers side door handle broke off when it was really cold out.
Does need some TLC but I am willing to work something out.
I have to systems if anyone is interested that I can add. One retails around $500 and the other retails about $5000-6000+
02-21-07, 10:02 PM
#377
Full Member
Join Date: Nov 2006
Location: IA
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by E Dogg
then u can park it in the garage out here and forget whos it is
02-21-07, 11:11 PM
#378
f gi chokes
Join Date: Jan 2002
Location: Quad Cities
Posts: 410
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by rotor88
Anyone have a dr. side inner tie rod for manual rack or any side from a p/s rack?
FC.
Thanks.
Jesse
FC.
Thanks.
Jesse
i have one on my na if you want it.
02-22-07, 01:04 AM
#379
f gi chokes
Join Date: Jan 2002
Location: Quad Cities
Posts: 410
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Sesshoumaru
I believe your looking for low impedence injectors. S4's came in both high and low impedences since the 88's and 10AE removed the resistor bank.
I'm sure we can find a couple low impedence 550cc injectors. I would recomend getting them cleaned and flow tested. That requires little money and would ensure proper flow.
I'm sure we can find a couple low impedence 550cc injectors. I would recomend getting them cleaned and flow tested. That requires little money and would ensure proper flow.
i need a pair of 87 tii injectors. if you have some, i'll drive up there tomorrow to get them. i'd like to drive my car before it snows.
02-22-07, 01:41 AM
#380
f gi chokes
Join Date: Jan 2002
Location: Quad Cities
Posts: 410
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by RX7_2ner
i need a pair of 87 tii injectors. if you have some, i'll drive up there tomorrow to get them. i'd like to drive my car before it snows.
02-22-07, 11:40 AM
#383
f gi chokes
Join Date: Jan 2002
Location: Quad Cities
Posts: 410
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by E Dogg
Do you have the rest of the manual rack?
Originally Posted by driftfc87
im not sure if brians would work off of his car cause he would probly let you use them while you get new ones or something his car is a 88
02-22-07, 12:38 PM
#385
f gi chokes
Join Date: Jan 2002
Location: Quad Cities
Posts: 410
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by E Dogg
Intrested in parting with it?
if jesse doesn't want the inner tie rod, then you can have it.
if you want, you can come down here and pull it off yourself, cuz i won't have time to take it off for a few days. i should have time on sunday to take it off, unless it's snowing.
02-23-07, 03:07 PM
#389
Tenseiga
Thread Starter
iTrader: (1)
Join Date: Apr 2003
Location: Iowa
Posts: 2,252
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by rotor88
I don't need the tie rod anymore.
Thanks!
Jesse
Thanks!
Jesse
This year will be more of tweaking for me on the FD. I got most of the large stuff done last year (turbo install etc). With that being said, I might be looking to the FC's again for some more adrenaline at the track.
Last year was the first time eric and I went to a 1/4mile track and I think we both liked it more than we had initiall thought.
02-23-07, 03:10 PM
#390
Tenseiga
Thread Starter
iTrader: (1)
Join Date: Apr 2003
Location: Iowa
Posts: 2,252
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Love my RX7
Does anyone have a hood prop for a 93? and a drivers side door handle?
Ray Crowe usually had good prices on oem stuff. I think the door handles new aren't much over 100 dollars.
02-23-07, 03:45 PM
#391
FC Boneyard
iTrader: (1)
Join Date: Nov 2003
Location: Memphis, TN
Posts: 863
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Sesshoumaru
They make neumatic ones like trunk shocks. I think rx7store sell them if you interested in something like that.
Ray Crowe usually had good prices on oem stuff. I think the door handles new aren't much over 100 dollars.
Ray Crowe usually had good prices on oem stuff. I think the door handles new aren't much over 100 dollars.
and this is our tax dollars at work.... lol
02-26-07, 12:27 PM
#393
Full Member
Join Date: Nov 2006
Location: IA
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Sesshoumaru
They make neumatic ones like trunk shocks. I think rx7store sell them if you interested in something like that.
Ray Crowe usually had good prices on oem stuff. I think the door handles new aren't much over 100 dollars.
Ray Crowe usually had good prices on oem stuff. I think the door handles new aren't much over 100 dollars.
Is there a web site?
02-27-07, 12:58 AM
#397
everything will be okay
iTrader: (15)
Join Date: Oct 2005
Location: Cedar Rapids, IA
Posts: 1,650
Likes: 0
Received 0 Likes
on
0 Posts
i had one, but its been parted since last year.
ive got all 3 side housings still, theyre in good shape too....
no rotors or rotor housings though, sorry.
ive got all 3 side housings still, theyre in good shape too....
no rotors or rotor housings though, sorry.
02-27-07, 01:15 AM
#398
f gi chokes
Join Date: Jan 2002
Location: Quad Cities
Posts: 410
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by driftfc87
anybody have a good s4 na motor they want to get rid of i think a coolant seal might be shot in my motor im not a 100% but i would like to see if anybody has one
i don't know anyone that has one.
btw, i found out what was wrong with my car. the wastegate actuator bolts broke off on the manifold, so it was just hanging there.