Microtech question about idle control
#1
Full Member
Thread Starter
Join Date: Oct 2006
Location: Michigan
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
question about idle control
how does the lt8 control idle? i have looked at the wiring diagam on the web site for the s4/s5. and it does not show any kind of output or idel control for the engine.
#3
Full Member
Thread Starter
Join Date: Oct 2006
Location: Michigan
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
some one needs to throw me a bone, i have done some serchen but havent come up with any thing. the wiring diagram shows nothing for ide controle on microtech web site
#4
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
The idle valve connects to the aux output as shown in the 13B wiring diagram (back of manual).
However in order to enable this, the Microtech has to be sent back to Microtech to be programmed. The cost is $165 or so as I recall.
And for some reason, they told me that the aux input is lost during this process...
However in order to enable this, the Microtech has to be sent back to Microtech to be programmed. The cost is $165 or so as I recall.
And for some reason, they told me that the aux input is lost during this process...
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM
imitek
3rd Generation Specific (1993-2002)
9
08-28-15 05:28 PM
CaptainKRM
2nd Generation Specific (1986-1992)
14
08-26-15 09:52 PM