Microtech Newb question
#1
Power = Cubic Dollars
Thread Starter
Join Date: Jan 2006
Location: Olathe, KS
Posts: 347
Likes: 0
Received 0 Likes
on
0 Posts
Newb question
Ok, I'm considering picking up a Microtech for my 7. I have an 88 vert. I picked up pretty cheap, and I am looking to build a sleaper. I mostly plan to run an autocross races, but I just want to build something and use products that I will not have to upgrade some day.
I have my engine apart, and here are my plans. I am going to be running a little turbo. Overall horsepower is not my game here, I need LINEAR power from around 2200 to redline. I will be adding a small turbo (something that will spool QUICK.) I am going to continue running the n/a rotors. I know this is not recommeded, but I want to try it. I am going to be running a Racing Beat holley intake. Here is were it gets fun. I's not going to be running a stupid carb, I am going to run a 4 barrel throttle body. This particular body will hold up to 8 Ford intectors. I guess I can block off 4 of them, but I really would like to use them.
Questions:
1) Where should I start with injectors (btw, they are Ford injectors?)
2) What microtech software can I get to fire all 8 injectors, and the stock ignition?
3) Should I just buy the adapter, and run a laptop, or how does everyone like the handheld controllers?
4) Does this sytem work off of a MAP sensor, and can I get rid of the AFM?
5) How hard it this to install and get running? I would consider myself VERY computer literate, but how is the installation and basic set-up?
Thanks for everyone's help in advance.
Jesse
I have my engine apart, and here are my plans. I am going to be running a little turbo. Overall horsepower is not my game here, I need LINEAR power from around 2200 to redline. I will be adding a small turbo (something that will spool QUICK.) I am going to continue running the n/a rotors. I know this is not recommeded, but I want to try it. I am going to be running a Racing Beat holley intake. Here is were it gets fun. I's not going to be running a stupid carb, I am going to run a 4 barrel throttle body. This particular body will hold up to 8 Ford intectors. I guess I can block off 4 of them, but I really would like to use them.
Questions:
1) Where should I start with injectors (btw, they are Ford injectors?)
2) What microtech software can I get to fire all 8 injectors, and the stock ignition?
3) Should I just buy the adapter, and run a laptop, or how does everyone like the handheld controllers?
4) Does this sytem work off of a MAP sensor, and can I get rid of the AFM?
5) How hard it this to install and get running? I would consider myself VERY computer literate, but how is the installation and basic set-up?
Thanks for everyone's help in advance.
Jesse
Thread
Thread Starter
Forum
Replies
Last Post
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM