Microtech Need a map for lt-8
Need a map for lt-8
Installed a microtech lt-8 on a repu and truck won't start throws a lot of smoke when trying and smells like raw fuel,it also keeps fouling the plugs
these are the mods I have
S4 TII engine,stock ports
turbonetics t-66 ball bearing turbo
2x750 primary injectors
2x1600 secondary injectors
aeromotive fuel pump feeding surge tank
aeromotive 1000 fuel pump feeding the engine
S5 LIM with FD UIM and rotary-works 90mm TB
stock coils
I just need a good map for what I got so I can be a able to drive the truck to a tuner,any help would be apreciated.thanks
these are the mods I have
S4 TII engine,stock ports
turbonetics t-66 ball bearing turbo
2x750 primary injectors
2x1600 secondary injectors
aeromotive fuel pump feeding surge tank
aeromotive 1000 fuel pump feeding the engine
S5 LIM with FD UIM and rotary-works 90mm TB
stock coils
I just need a good map for what I got so I can be a able to drive the truck to a tuner,any help would be apreciated.thanks
yeah i got good spark on both leading and trailing coil,it almost wants to start but then it doesnt,and fouls the plugs real bad.when i crank it over it starts puffing out white smoke and smells like raw fuel.
Thread
Thread Starter
Forum
Replies
Last Post
killerrx710
Adaptronic Engine Mgmt - AUS
5
Sep 28, 2015 09:13 AM
killerrx710
2nd Generation Specific (1986-1992)
1
Sep 24, 2015 10:57 PM



