Microtech lt8s with mechanical fuel pump
#1
Junior Member
Thread Starter
Join Date: Oct 2009
Location: ireland
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
lt8s with mechanical fuel pump
Hello from Ireland,just looking for advice on my fuel pump setup.
specs =13b s5 semi-p,4 barrel throttle 4 ID2000s etc its for drag racing.
My question is, since i am using a mechanical fuel pump(aeromotive style) do i need to do anything specific to the pump settings in the maps.The motor fired first time with a drop of fuel down the intake and idles perfectly which is a good sign i suppose with the stock injectors fitted for now.Thanks in advance for any input,cheers Dave.
specs =13b s5 semi-p,4 barrel throttle 4 ID2000s etc its for drag racing.
My question is, since i am using a mechanical fuel pump(aeromotive style) do i need to do anything specific to the pump settings in the maps.The motor fired first time with a drop of fuel down the intake and idles perfectly which is a good sign i suppose with the stock injectors fitted for now.Thanks in advance for any input,cheers Dave.
#3
Junior Member
Thread Starter
Join Date: Oct 2009
Location: ireland
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Thanks again man i am sure i will be back for more as i am the only person in Ireland with a full blown tube chassis drag car in the country, and with a rotary engine ,and with a microtech ecu so i am really out on my own.Drag racing is still quite basic here,anyway thanks again.
Last edited by rotormouse; 11-25-12 at 02:41 PM. Reason: left out words
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
ChrisRX8PR
Single Turbo RX-7's
21
10-18-15 04:01 PM