Microtech lt12 3 rotor breaking up
#1
dyno queen potentials
Thread Starter
Join Date: Oct 2007
Location: ga
Posts: 445
Likes: 0
Received 0 Likes
on
0 Posts
lt12 3 rotor breaking up
i'm tuning a 3 rotor with a lt12. at 5k rpm it breaks up, if i add fuel or minus fuel it does the same thing. rpmcrs i minus from 1% to 5% then add 1% to 5% at 4500 to 6000 rpm. same result. i messed with the wot settings same thing. changed the load settings same thing. afr reads 10s to 11s, at times i see 12s. the car is running stock twin turbos seeing 10 to 12 psi. timing is 23 deg. any help is appreciated thanks
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM