Microtech low low throttle = sounding/running like crap
#1
what 7
Thread Starter
low low throttle = sounding/running like crap
Hey guys, I am using the laptop software. I did the TPS Cal so I have the astrick. Whenever I'm one or 2 bars in on the TPS meter, my car sounds like it's missing and just being crappy. All other times it runs beautifully. How do I fix this ?
#2
Have a look at thforced e values in your idle map & then the ones in your load map.
You will probaly find that there is a big difference in the 2.
For example......
you may be idling in the 15" map & have 1.5m/s in the idle map & 2.2m/s in the load map.When the ecu switches from the idle map to the load map when you touch the throttle it will see this big difference & have a big stumble.
Have a look mat this & see how you go.The 2 maps don't have to be the same but should be reasonably close
You will probaly find that there is a big difference in the 2.
For example......
you may be idling in the 15" map & have 1.5m/s in the idle map & 2.2m/s in the load map.When the ecu switches from the idle map to the load map when you touch the throttle it will see this big difference & have a big stumble.
Have a look mat this & see how you go.The 2 maps don't have to be the same but should be reasonably close
#5
what 7
Thread Starter
Yeah, I have no idea right now, my sunroof leaked onto my Pentium 120 laptop, so I'm driving around with my head cut off
I should be getting another el cheapo one soon.
I should be getting another el cheapo one soon.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM