WINSON-FC3S

Hi Guys,
Is it possible to link up a anti lag systems on a microtech ltx12? Anyone have tried this before?

10sec rx7

i have used the aux input to control a basic anti lag on my car, i can get maxium boost in no time flat,

set the aux inp rpm lim to about 4500
inp add to 1.00
inp tim -5 or so,

to use this put the aux input to +12v, then flatten the pedel and watch the boost guage rise,

Dale

tri_tam

cool
do you need anything else to make it work? just setup?
microtech can cut spark plug?

WINSON-FC3S

Hi 10 Sec Rx7,
Thanks for your info, but can you explain more clearly? Are you refering to the Aux input RPM?

What do you mean by "inp add to 1.00" and "inp tim -5 or so"

How do we activate if we want it? or do we have set to Aux input rpm when we want it or what? And how do we turn it on and off?

Pls Advises....

10sec rx7

i dont know what it cuts but it builds boost very very fast when you enable it and flatten the throttle,

in the aux settings you will see there is a heap of settings for the input,

these are

InpRPMlim, sets rpm limit
InpAIRadd, if you have a bac you can add air to idle up
InpEnrich, how much fuel to add in MS
InpTiming, how much timing to pull out or add.

i set the rpm limit to about 4500
enrich to 1.00
timing to -5 or so

Dale